This 50m distance measuring meter is made of two parts: the laser distance outside unit and the sole part laser measure module. Great distance range is from 3cm to 50 meters with ±1.5mm high accuracy. Digital distance measuring device is quick and reliable measure with one hand pushing the button. It is designed for hand helding, very convenient to put in your jacket pocket or trouser pocket. 50M Laser Distance Measurer,Mini Laser Measurer, Laser Measure 50M,50M Laser Distance Meter Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com
After the salt spray test chamber is used, if it is not the next test, the water in the box should be drained immediately, and the inner wall of the box should be dried to avoid scale. Since the jaws of the equipment are often used, it is easy to wear and oxidize too much, which will cause the small piston to leak oil. Therefore, the jaws should be cleaned frequently and kept clean (zui is good to finish the experiment every time). Any testing machine needs to be inspected regularly, and maintenance of the salt spray corrosion test chamber is often required. Regularly check the screws on the jaws and tighten them if they are loose. Regularly check the transmission of the sprocket. If it is found to be loose, re-tension the tensioner. Pay attention to whether the rear panel of the controller is in good contact. If the test box is not used for a long time, please turn off the controller. The interface of the controller should be correct. If the connection is wrong, it will cause damage to the equipment.
In short, whether it is a small object or a sophisticated instrument, it requires regular maintenance, in order to extend the life of the device and ensure the performance of the device. Therefore, the maintenance of the equipment is indeed very important.
1>. Easy to Use. It is very easy to learn how to use a Laser Distance Meter, it can measure distance with pressing a single button.
2>. Safety. Using a laser distance meter to measure is much safer than using a measure tape, for users do not need to climb up and down.
The salt spray test chamber is currently used in the industry mainly to prepare salt liquids using sodium chloride and purified water (or distilled water, deionized water). These salt liquids are very harmful to materials and human body during the test, especially in making salt. In the fog corrosion test, the salt spray is sprayed outwards. It is more prudent. Do not open the cover without special requirements, and carefully regulate the operation to ensure safety.